MR Mini GSM 900/3G - Mobile Repeater South Africa
 - 1MR Mini GSM 900/3G - Mobile Repeater South Africa
 - 1

MR Mini GSM 900/3G

R 3,975.00

100 in stock

Cable Upgrade

+ R 950.00
+ R 850.00
+ R 450.00
+ R 3,995.00

Extended Warranty

Product price
Additional options total:
Order total:

Product Description


The MR Mini GSM 900/3G X13 repeater kit captures and boosts a weak mobile signal through a high gain antenna and amplifier and boosts coverage for areas up to 250 square meters. Our Mini MR GSM 900/3G X13 will give you guaranteed coverage for your home, office, cabin, warehouse or facility and works with all GSM 900 and 3G data providers. This is the only mobile repeater with digitally adjustable gain control (automatic or manual) and anti oscillation barrier. These unique features make our repeater the most modern and technically advanced repeater available. The repeater is compatible with all GSM 900Mhz networks (Vodacom) and all 3G data networks (tested on Vodacom, Telkom, Cell-C and MTN 3G). The adjustable gain control allows the transmission of a perfectly calibrated signal which will provide the best possible phone call experience and enhances the quality of the signal to achieve ideal mobile phone performance. The gain control also enables you to isolate/limit the signal to a certain area (no loss to outside or similar). The anti oscillation barrier prevents overloads, (the repeater amplifies itself) which simplifies the installation of the system. The MR Mini GSM 900/3G X13 repeater kit comes complete with everything you need to increase signal strength and stop dropped calls. This product is simple to install, comes with 100% free technical support and is shipped from South Africa.

  •     Dual Band GSM 900 and 3G 2100
  •     adjustable gain control up to 55dB
  •     Coverage up to 250 sq m
  •     Supports 50 simultaneous users
  •     Works with all South Africa GSM 900 and 3G providers
  •    Money Back Guarantee

Our MR Mini GSM 900/3G X13 is a kit used to amplify mobile phone signals. the following components are included – repeater unit, external antenna, internal antenna and coax antenna cable. The repeater unit is a blue component equipped with a digital screen and two ports to connect the external and internal antennas. Both ports are marked accordingly. The white, square external antenna should be placed on the roof or exterior wall of the building. A bracket for solid placement is included. The external antenna can be connected to the repeater unit, using the coax antenna cable (Different lengths available) The internal antenna can be connected straight to the repeater units indoor port.

Included components:

  •     Repeater unit
  •     External antenna / Bracket
  •     Internal antenna
  •     Coax antenna cable (50Ω, 10m)
  •     Power supply (230V/110V – 12V DC)
  •     Installation manual

Technical Specifications

Gain ( dB) Uplink Gp≥55, Downlink Gp≥60
Pass band ripple ≤5dB
Guard band rejection (BW-60dB)≤42MHz, (BW-70dB)≤45MHz
I/O impedance 50Ω/N connector
I/O return loss ≤-8dB
Export power (Po) ≥323dBm
Intermodulation Attenuation: ≤-40dBc (Po=13dBm)
Transmission Delay ≤0.5μs
Ambient temperature -10℃~50℃
Power supply AC110~220V + – 10%
Connector Mode N/K for both in-out antenna socket
Diamension 235 x 178 x 25 mm