- 4G Mobile Phone Booster
- All Networks Signal Booster
- Antenna Upgrade
- Best Sellers
- Boat/Yacht Solutions
- Cable Upgrade
- Cell C Mobile Repeaters
- Cellphone signal booster Home & Office
- Connectors & Adapters
- Extended Warranty
- Large Building Booster Installation
- Mobile Boosters Home or Home Office
- Mobile Repeater
- Mobile Repeater South Africa
- MTN Mobile Repeaters
- Office Signal Booster Up to 500m sq
- Popular Signal Boosters
- Signal Booster for 3G Networks
- Signal Boosters - Offices Hotels & Hospitals
- Special Antenna
- Specials Cheap Discounted Mobile Repeaters
- Telkom Signal Boosters
- Up to 1000m
- Up to 2500m
- Vehicle Boosters for Vans Jeeps and Camping
- Vodacom Signal Booster
A Brief Look at How a Cellular Signal Booster Works
Why It Is Important To Measure Signal Strength Before Installing Signal Boosters?
A lot of factors can affect the performance of your cell signals booster, including the distance from the cellular base station, the type of antennas you are using, the power of your amplifier, etc. Another important factor that can be crucial for increasing the performance of your booster is the power of the outside signals. So you have to find the signal quality around your home/office before installing your cellular signal booster. Hence, through this article, we list the importance of measuring signal strength for your knowledge.
Why Measuring Signal Strength Is Important?
A cellular signal booster works by amplifying the strength of the outside signals it receives. Therefore, its gain can be greatly reliable on the outside signal quality. Hence, it is important for you to find a good spot with maximum signal strength for installing the external antenna of your cell signal boosters.
So make sure that you measure the outside signal strength around your home/office before installing the signal booster. This will help you to get better performance from your booster.
How To Measure The Signal Strength In Your Area?
You can use your mobile phone for the purpose of measuring signal strength. But the bars may not always provide accurate readings. Therefore, it is better to set your phone in field test mode so that it will be possible for you to get accurate numerical data of the signal strength present in different areas around your home or office.
Also, there are certain mobile apps that are designed for measuring the signal strength in decibels. You can get them from your app store. They will help you to easily measure the signal strength in different spots so that it will be possible for you to install your external antenna in the right location.
You can also get a signal meter which are devices that are specifically designed for measuring the signal value in different areas. Choose this device if you want to get precise readings of the signal strength around your home or office.
After getting the readings of signals in different areas, you can compare these measurements for choosing a good spot for installing the external antenna of your boosters so that it can receive maximum signals. This will help you to boost the performance of your cell signal booster.
Installing the external antenna of your cell signal booster in a spot with maximum signal strength is necessary for receiving good outside signals. Hence, make sure that you measure the strength of the signals around your building before installing your signal boosters.